SeaTel TV-at-Sea 9497 Dual C and Quad KU
Sea Tel's Model 9497 operates in many areas around the globe and is compatible with all known and planned TV satellites.
It is an extremely sensitive system especially with the enhanced pointing accuracy, stability and reliability made possible by Sea Tel's patented, 3-axis stabilization technology.
Choose this antenna when you want the best TV coverage you can get but space prohibits installation of our Model 14400 antenna.
- Antenna Gain C-band: 37.5 dB at 4.0 GHz
- Antenna Gain Ku-band: 46.5 dB at 11.25 GHz
- Min. EIRP C-band: 30 - 31 dBW
- Min. EIRP Ku-band: 35 - 36 dBW
- Dish Diameter: 2.4 m; 96 in
- Radome Diameter: 3.2 m; 126 in
- Radome Baseframe: Galvanized steel; Optional Aluminum
- Antenna Stabilization: 3-axis servo
- Built-In GPS Provides Automatic Satellite Acquisition
- Ship's Motion: +/- 25º Roll or +/-20º Roll and +/- 15º
Pitch
- Roll & Pitch Response Rate: Unlimited
- Azimuth Range: Unlimited turning
- Full Elevation Range: 0º to 90º
- Reception: Single C, Single Ku/C-band capability. Dual
C-linear, Dual Ku-linear or circular, Dual C-band switched with Dual or Quad
Ku-band linear, or simultaneous Dual C and Dual or Quad Ku-band capabilities
- RF Electronics: the proper choice of LNB's will be
provided to match the ship's cruising area and satellite receiver selection.
- Ku-band: The entire frequency range for Ku-band
satellite television is 10.7 to 12.75 GHz. LNBs covering this entire frequency
band are available. However, this does not guarantee coverage in all areas.
Proper polarization is also an issue as both linear polarizations (horizontal
and vertical) and circular polarizations (left-hand and right-hand) are used,
and one configuration is not compatible with the other.
- C-band: The C-band frequency range is 3.7 to 4.2 GHz
worldwide. Sea Tel TV-at-Sea™ systems are delivered with C-band LNB noise
temperatures of 15 to 25 degrees K. the IF frequency in all cases is 950-1450
MHz.
- Meets Navy MIL-STD-901D GRADE A shock standards and
MIL-STD-461 EMI & RFI standards (including 200V/M)
- Accommodates any number of satellite receivers. Many
TV sets may be installed onboard, each receiving its own programming from its
satellite receiver
- Unmatched stabilization accuracy allows the system to
detect the slightest motion that may affect the antenna's connection and
correct as needed.
- Ready for multiple satellite selection.
- HD ready